. Summary of pipe making machine, Tube mill line, Pipe mill
www.steelpipemakingmachine-tubemill.com
goodbusiness16@gmail.com
The pipe making machine, Tube mill line, Pipe mill is intended for manufacturing of round pipe of Φ12mm-Φ32mm with thickness of 0.3mm–2.0mm from cold-rolled and hot-rolled coil strip by means of unclosed tubular blank with its subsequent welding into tube, edge heating by means of solid state high-frequency welder, longitudinal seam welding in rolls of tube welding machine, cooling, further sizing or shaping and on-stream cutting of endless tube in measured lengths.
Finished product will be of round, square or rectangular pipe.
II. The technical flow of pipe making machine, Tube mill line, Pipe mill the production line
{SteelTape}→→ Double-head un-coiler →→Strip-head Cutter and welder→→
Spiral Accumulator→→Forming section(Flattening unit +Main driving unit +Forming unit +Guide unit +High frequency induction welding unit +squeeze roller)+ De-burr frame →→Cooling unit →→ Sizing unit and straightener →→Flying saw under computer-control →→ Run-out table
III. Basic conditions:
a) Steel Pipe Specification of pipe making machine, Tube mill line, Pipe mill
1. Pipe diameter: Ø12–Ø32mm
Pipe Thickness: 0.3– 2.0mm
2. Square & Rectangle Pipe: 10X10mm –25X25mm
Pipe Thickness: 0.3 – 1.5mm
3. Pipe Length: 6.0m – 9.0m
4. Length Tolerance: 0-6mm
b) SteelTape Specification of pipe making machine, Tube mill line, Pipe mill
1. Material: Carbon steel (Q195)
2. Steel Tape: Inner diameter: Φ470-Φ510mm
Outer diameter: Φmax=1500mm
Strip steel width: 25mm-100mm
Strip steel thickness: 0.3mm-2.0mm
The maximum weight: 1.0 tons
c) Electric installed capacity: appro. 300KW
d) Size of the whole line: appro. 40X5m
e) Line Speed: 50-120m/min
|
|
HG32 MODLE PIPE MAKING MACHINE,TUBE MILL LINE for threading pipe,scafforld pipe Images
|
